ANXOR
ENGINEERING
Implementing customized technological solutions
Electrical studies in power systems through simulation software
- Short circuit study
- Protection coordination study
- Determination of electric arc levels
- Load flow study
- Network impact study
- Engine starting analysis
- Design of grounding systems
ELECTRICAL TESTS
![PRUEBAS-A-TRANSFORMADORES-DE-POTENCIA_5](https://nic.anxor.com/en/wp-content/uploads/2021/07/PRUEBAS-A-TRANSFORMADORES-DE-POTENCIA_5.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-transformadores-de-potencia_1-1.jpg)
Testing of power transformers
- Power factor
- Isolation tests
- Transformation ratio
- Resistance of coilings
- Spectroscopy in the Frequency Domain
- Analysis of oils
- Frequency response analysis
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Testing of power transformers
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-transformadores-de-potencia_1-1.jpg)
Testing of power transformers
- Power factor
- Isolation tests
- Transformation ratio
- Resistance of coilings
- Spectroscopy in the Frequency Domain
- Analysis of oils
- Frequency response analysis
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![r](https://nic.anxor.com/en/wp-content/uploads/2021/07/r.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-interruptores-y-seccionadores_1.jpg)
Testing of switches and disconnectors
- Insulation tests
- Contact resistance (dynamic / static)
- Operating times
- Motion (acceleration / travel / velocity)
- Power factor
- SF6 analysis (optional)
- Contact resistance
- Check synchronization of mechanical and electrical elements
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Testing of switches and disconnectors
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-interruptores-y-seccionadores_1.jpg)
Testing of switches and disconnectors
- Insulation tests
- Contact resistance (dynamic / static)
- Operating times
- Motion (acceleration / travel / velocity)
- Power factor
- SF6 analysis (optional)
- Contact resistance
- Check synchronization of mechanical and electrical elements
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![f](https://nic.anxor.com/en/wp-content/uploads/2021/07/f.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-TCS-y-TPS_1.jpg)
TCS and TPS test
- Power factor
- Insulation tests
- Transformation ratio -TTR
- Winding resistance
- Oil analysis
- Saturation & Burden
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
TCS and TPS test
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-TCS-y-TPS_1.jpg)
TCS and TPS test
- Power factor
- Insulation tests
- Transformation ratio -TTR
- Winding resistance
- Oil analysis
- Saturation & Burden
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![t](https://nic.anxor.com/en/wp-content/uploads/2021/07/t.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-reles-de-proteccion_1.jpg)
Testing of protection relays
- Secondary injection
- Checking settings
- Operation curves
- Implementation of adjustments
- Tests to the complete scheme
- Calibration
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Testing of protection relays
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-a-reles-de-proteccion_1.jpg)
Testing of protection relays
- Secondary injection
- Checking settings
- Operation curves
- Implementation of adjustments
- Tests to the complete scheme
- Calibration
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![x](https://nic.anxor.com/en/wp-content/uploads/2021/07/x.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-de-sistema-puesta-a-tierra_1.jpg)
Grounding system tests
- Curve intersection method
- Winner method
- Three point method
- Fall of potential method
- Slope method
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Grounding system tests
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-de-sistema-puesta-a-tierra_1.jpg)
Grounding system tests
- Curve intersection method
- Winner method
- Three point method
- Fall of potential method
- Slope method
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![g](https://nic.anxor.com/en/wp-content/uploads/2021/07/g.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-de-bancos-de-baterias_1.jpg)
Battery bank test
- Ripple voltage and current
- Charge current and float voltage
- Cell voltage and impedance
- Battery bank discharge test
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Battery bank test
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/Pruebas-de-bancos-de-baterias_1.jpg)
Battery bank test
- Ripple voltage and current
- Charge current and float voltage
- Cell voltage and impedance
- Battery bank discharge test
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![pruebas-generadores_c](https://nic.anxor.com/en/wp-content/uploads/2021/09/pruebas-generadores_c.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/pruebas-generadores_g.jpg)
Generator testing
- Insulation tests
- Winding resistance
- Check synchronization of mechanical and electrical elements
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Generator testing
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/pruebas-generadores_g.jpg)
Generator testing
- Insulation tests
- Winding resistance
- Check synchronization of mechanical and electrical elements
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![termografia-c](https://nic.anxor.com/en/wp-content/uploads/2021/09/termografia-c.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/termografia-g.jpg)
Thermography analysis
- Temperature profile analysis in high, medium and low voltage electrical systems.
- Determination of mechanical stress in rotating machines, such as bearings.
- Analysis of losses in cold rooms, ovens, precision air conditioning control systems.
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Thermography analysis
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/termografia-g.jpg)
Thermography analysis
- Temperature profile analysis in high, medium and low voltage electrical systems.
- Determination of mechanical stress in rotating machines, such as bearings.
- Analysis of losses in cold rooms, ovens, precision air conditioning control systems.
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![pruebas-mt_c](https://nic.anxor.com/en/wp-content/uploads/2021/09/pruebas-mt_c.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/pruebas-MT_-g.jpg)
Testing of medium voltage cables
- Flaw detection tests
- Low frequency tests (VLF Sinus 45 KV)
- Partial discharge detection
- Power Cable Tracing Location
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
Testing of medium voltage cables
![](https://nic.anxor.com/en/wp-content/uploads/2021/07/pruebas-MT_-g.jpg)
Testing of medium voltage cables
- Flaw detection tests
- Low frequency tests (VLF Sinus 45 KV)
- Partial discharge detection
- Power Cable Tracing Location
![](https://nic.anxor.com/en/wp-content/uploads/2021/05/logotipo.jpg)
![](https://nic.anxor.com/en/wp-content/uploads/2021/09/mant.jpg)
INDUSTRIAL MAINTENANCE
- Maintenance of Low and Medium Voltage Substations
- Predictive, preventive and corrective maintenance
- Diagnosis of industrial electrical installations
- 24/7 maintenance contracts